|
RadioHead
|
Defines register values for a set of modem configuration registers. More...
#include <RH_RF22.h>
Public Attributes | |
| uint8_t | reg_1c |
| Value for register RH_RF22_REG_1C_IF_FILTER_BANDWIDTH. | |
| uint8_t | reg_1f |
| Value for register RH_RF22_REG_1F_CLOCK_RECOVERY_GEARSHIFT_OVERRIDE. | |
| uint8_t | reg_20 |
| Value for register RH_RF22_REG_20_CLOCK_RECOVERY_OVERSAMPLING_RATE. | |
| uint8_t | reg_21 |
| Value for register RH_RF22_REG_21_CLOCK_RECOVERY_OFFSET2. | |
| uint8_t | reg_22 |
| Value for register RH_RF22_REG_22_CLOCK_RECOVERY_OFFSET1. | |
| uint8_t | reg_23 |
| Value for register RH_RF22_REG_23_CLOCK_RECOVERY_OFFSET0. | |
| uint8_t | reg_24 |
| Value for register RH_RF22_REG_24_CLOCK_RECOVERY_TIMING_LOOP_GAIN1. | |
| uint8_t | reg_25 |
| Value for register RH_RF22_REG_25_CLOCK_RECOVERY_TIMING_LOOP_GAIN0. | |
| uint8_t | reg_2c |
| Value for register RH_RF22_REG_2C_OOK_COUNTER_VALUE_1. | |
| uint8_t | reg_2d |
| Value for register RH_RF22_REG_2D_OOK_COUNTER_VALUE_2. | |
| uint8_t | reg_2e |
| Value for register RH_RF22_REG_2E_SLICER_PEAK_HOLD. | |
| uint8_t | reg_58 |
| Value for register RH_RF22_REG_58_CHARGE_PUMP_CURRENT_TRIMMING. | |
| uint8_t | reg_69 |
| Value for register RH_RF22_REG_69_AGC_OVERRIDE1. | |
| uint8_t | reg_6e |
| Value for register RH_RF22_REG_6E_TX_DATA_RATE1. | |
| uint8_t | reg_6f |
| Value for register RH_RF22_REG_6F_TX_DATA_RATE0. | |
| uint8_t | reg_70 |
| Value for register RH_RF22_REG_70_MODULATION_CONTROL1. | |
| uint8_t | reg_71 |
| Value for register RH_RF22_REG_71_MODULATION_CONTROL2. | |
| uint8_t | reg_72 |
| Value for register RH_RF22_REG_72_FREQUENCY_DEVIATION. | |
Defines register values for a set of modem configuration registers.
Defines register values for a set of modem configuration registers that can be passed to setModemConfig() if none of the choices in ModemConfigChoice suit your need setModemConfig() writes the register values to the appropriate RH_RF22 registers to set the desired modulation type, data rate and deviation/bandwidth. Suitable values for these registers can be computed using the register calculator at http://www.hoperf.com/upload/rf/RF22B%2023B%2031B%2042B%2043B%20Register%20Settings_RevB1-v5.xls
1.8.17